HKS RB26 R32 R33 R34 V Cam System Step1 (w/o Valcon RB) | 22007-AN020
The intake cam side of the RB26DETT is changed to allow variable valve timing. The cam has duration of 248 degrees which seem a little conservative. However, with the variable timing, power increases can be found at low or high RPM.
Whether you are looking to find some time on the circuit through improve acceleration out of lower speed corners, or simply want something which can overtake with ease on the street, the HKS V Cam System provides good power from low RPM reducing the necessity for excessive gear changes. This especially noticeable when going from vacuum to boost to give the feeling of increased displacement.
Improved valve timing will allow for more complete combustion leading to improved fuel efficiency and cleaner exhaust emissions. HKS V CAM System is compatible with the stock pistons. When using with the thinner head gaskets or modified cylinder head, the clearance between valve and piston may be insufficient.
Exhaust cam should be selected dependent on turbo choice. Recommended: GT-SS-256 degrees, GT2530-264 degrees
NOTE: Compatible the stock piston. Surface polishing on the cylinder or using a thin gasket may cause insufficient clearance between the valve and the piston.
- Do not use this product if the bottom of the cylinder head or the upper side of the engine block has already been modified so an adequate valve recess cannot be maintained.
- Additional oil piping is required in order to install this kit.
- This kit does not include the camshaft for the exhaust side.
- It’s recommended to upgrade the factory oil pump to the large capacity type.
- Sparate purchase of the F-CON V Pro3.4 or Valcon type RB control device is needed.
PRODUCT INSTRUCTIONS CAN BE FOUND HERE
Kit Includes
- Special V-CAM shaft
- Variable valve timing unit (Vane type controller for high torque. Pulley with nickel plating.)
- Intake side special cylinder head cover. (HKS original casting product. No paint. Includes special logo plate.)
- V-CAM sensor harness. (F-CON V Pro 3.4 connected terminal)
- Oil control valve (Electromagnetic)
- Cam angle sensor (Highly accurate type)
- Oil lines (between the hydraulic take-out section of the engine side and the cylinder head cover.)
- Other short parts
Remarks
- Variable Valve Timing Control Unit: F-CON V Pro ver. 3.4 or VALCON type RB26
- CAM Shaft (EX): STEP 1 (256? or 264?)
- Valve Spring: Stock
- Allowable rotating speed: 8000 rpm
- Cylinder head Modification: No
- Piston: Stock
- Oil Pump: Recommends HKS enhanced parts
- Engine Oil: Recommend HKS SUPER TURBO RACING 15W50 or HKS Racing Pro 10W50
- Timing Belt: Inspect the wear or tension each drive 10,000 km. Adjust them if necessary.
- Other: The valve timing may not reach the target value due to insufficient hydraulic pressure when the viscosity is low. It cannot have an advanced angle when the water temperature of 60 degrees or lower.
Applications:
- Nissan Skyline GT-R BNR34 RB26DETT 1999-2002
- Nissan Skyline GT-R BCNR33 RB26DETT 1995-1998
- Nissan Skyline GT-R BNR32 RB26DETT 1989-1994
To provide faster delivery and turn around time; Kami Speed ships products out from different warehouses throughout the United States. Usually averaging 1-4 business days for processing prior to shipping.
Depending on the package, we ship using different carriers according to the item's location, content, and size.
Freight truck & international items, will require up to 7 business days to ship due to size and logistics.
All orders made after 3:00pm ET will be processed the next business day.
Unless otherwise noted as "In Stock" with qty amount. Pre-Orders, Special orders, & Made to order items have an estimate of 5+ weeks for USA made parts and 10+ weeks for JDM/ Overseas parts. Please check with us for exact ETA as it will vary by brand and item.
Orders over $500 will ship insured and over $1,000 with signature and insurance in order to guarantee delivery. Orders over $1000 may not be able to ship to a different address not listed as the billing address or confirm payment address from the form of payment used. Orders with suite numbers, different billing, or apartment numbers will require signature if valued over $200.
Delivery Inspection & Damage Claims
Large, oversized, fragile, and performance parts must be inspected immediately upon delivery and before installation. Damage, missing parts, incorrect items, or cosmetic concerns must be reported within 3 business days of delivery with photos of the product, outer box, inner packaging, and shipping label.
Please keep all packaging until the item has been fully inspected. Claims may be denied if the item has been installed, mounted, modified, test-fitted, used, reported late, or if the packaging has been discarded.
All international orders outside of the USA are subject to duties and taxes fees per your countries jurisdiction and determined by customs. Refusal to pay duties/taxes fees prior to delivery will have the product sent back to us. This will be treated a standard return and all fees including original and refusal shipping fees will be deducted from original amount.
Kami Speed serves the right to ship using an alternative method if we see it fit, in order to expedite shipping and reduce your rate depending on product value.
Processing and logistics on in stock international orders will take up to 7 business days to process & ship as sometimes we only have 1 international pickup a week.
In stock, non pre-orders or special order items can be returned within 30 days of the product arriving to your house or place of work.
30 days, unused. Refund = item price minus 20% restocking fee. Original shipping is non-refundable. Return shipping (if we provide label) is also deducted.
Returns will NOT be accepted on Clearance Items, Final Sales, Special Orders, Pre-Orders, Opened, Installed, Incomplete, or Otherwise Used Products. In order to initiate a return, an RMA number must be requested and approved via e-mail
Any loan orders will have a 10% cancelation fee to cover the loan processing fees or 3rd party merchant fees. No fee will be incurred if used as store credit.
For complete details on our return policy, please see our Help and FAQ link under HELPFUL INFO.
WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
HKS RB26 R32 R33 R34 V Cam System Step1 (w/o Valcon RB) | 22007-AN020
